MGL iefis explorer speed audio readout setting

Post here anything related to the MGL EFIS systems
Forum rules
Please keep your posts friendly and on topic. No politics or discussions of a controversial nature not related to our favorite subject of flying and avionics. Offending posts may be removed or moderated.
Post Reply
KevWal
Posts: 2
Joined: Thu Apr 25, 2024 8:17 am

MGL iefis explorer speed audio readout setting

Post by KevWal »

Hi

How do I set the top and bottom speed at which the iefis does audio speed read out please? I have checked the manual, checked the settings in the iefis, but i am strugaling to find it?

Thanks very much
Kevin
rainier
Site Admin
Posts: 647
Joined: Fri Aug 28, 2020 7:03 pm

Re: MGL iefis explorer speed audio readout setting

Post by rainier »

System Setup -> Operations setup menu.

Copilot mode below airspeed: xx - enter the speed below which the speed readout commences and then check the box to the right of this to activate it.
Note that your EFIS must be in active flight detect (the flight timer will be flashing in this case) - usually your EFIS will be setup to recognize start and end of a flight automatically in the same menu (minimum airspeed and engine RPM to detect a flight) - once detected it only looks at airspeed. A flight will be active if ASI remains above the stall speed for at least one minute after the trigger RPM has been exceeded.
Once airspeed falls below stall speed for 30 seconds the flight ends.

You can also enable a flight level readout.
KevWal
Posts: 2
Joined: Thu Apr 25, 2024 8:17 am

Re: MGL iefis explorer speed audio readout setting

Post by KevWal »

Thankyou!

Cheers
Kev
Post Reply